Boiler Installation Asheville

Frequently Asked Questions About Boiler Installation

What are the different types of boilers?

There are various types of boilers to choose from, each with its pros and cons::

• Combi Boilers (Combination Boilers): Most common and provide both heating and hot water on demand, They are compact and ideal for smaller spaces. They may struggle to meet high hot water demand for larger households.
• Regular Boilers (Conventional, Heat-Only Boilers): More complex systems that involve both a storage tank and a hot water cylinder. They deliver a consistent supply of hot water but are usually less energy-efficient than newer boiler types.
• System Boilers: They have components built in, reducing installation time and complexity. They are more compact than regular boilers but more expensive than combi boilers. . System boilers are suitable for properties with more than one bathroom or high hot water usage.
• Condensing Boilers: Highly efficient units recycle heat from exhaust gases to pre-heat water, minimizing waste. These are more expensive initially but reduce energy consumption and operating costs.

Consult with a heating engineer to determine the best boiler type for your property.

How long does it take to install a boiler?

Boiler installation typically takes one to three days, depending on the complexity of the job and whether you need to remove an existing boiler. . Additional factors that may affect installation time include the accessibility of the installation location and the condition of your existing plumbing. Always confirm installation times with a professional.

What is a boiler’s AFUE rating?

The AFUE rating measures how efficiently a boiler converts fuel to heat over a year. It's expressed as a percentage. For example, higher AFUE ratings indicate higher efficiency, resulting in less wasted fuel and money. The minimum AFUE for new boilers is typically 80%, but higher-efficiency models are available with AFUE ratings exceeding 95%. Prioritize energy efficiency when choosing a boiler to reduce costs and your carbon footprint.

How do I repressurize my boiler?

If the pressure gauge on your boiler shows low pressure, you'll need to add water to the system. Consult your boiler's manual for specific instructions, or follow these general steps::1. Turn off your boiler and allow it to cool.2. Locate the filling loop. This is usually a flexible braided hose connected to your mains water supply and boiler, under the unit. It may have a valve or tap.3. Open both valves on the filling loop carefully, If your boiler uses a lever-type handle, consult the manual. Listen for the sound of filling.4. Keep an eye on the pressure gauge. When the pressure reaches the recommended level (usually between 1 and 1.5 bar), close both valves on the filling loop turning clockwise.5. Turn your boiler back on. Confirm that pressure is at an appropriate level. If problems persist, contact a qualified HVAC technician.If you're uncomfortable performing this task yourself, contact a Gas Safe registered engineer. Ensure your safety and avoid costly repairs by having it done right.