Boiler Installation Ellisville

Top New Boiler in Ellisville

Get multiple Boiler Replacement quotes for your project today! Compare profiles, reviews, accreditations, portfolio, etc... and choose the best deal.

Service Needed
City or Town
Find Pros

Over 15,611+ HVAC Contractors registered

Our HVAC pros operate in Ellisville and surrounding areas!

HVACCompaniesHub has curated and vetted Top HVAC Businesses near Ellisville. Find a trustworthy contractor today.

Frequently Asked Questions About Boiler Installation

Have questions about boiler systems? Find answers to common questions and make informed decisions for your heating upgrade.

What are the signs that I need a new boiler?

Several symptoms can indicate it's time to replace your boiler :
  • Your boiler is more than 15 years old:
    • Older boilers are much less efficient than modern condensing boilers and are more likely to break down, so upgrading to a new, energy-efficient boiler could save you significant amounts on your energy bills over time.
  • Your boiler keeps breaking down:
    • Frequent service calls might mean it's time for a new boiler.
  • Your energy bills are increasing:
    • An inefficient boiler uses more energy resulting in costly increases to your heating bills. Consider replacing it with an energy-efficient model.
  • Your boiler is making strange noises:
    • Unusual banging, whistling, or gurgling sounds could indicate a problem with your boiler and should be investigated by a qualified heating engineer.
  • Your radiators are not heating up properly:
    • Radiators not getting hot evenly or consistently could indicate a problem with your boiler's circulation.
  • Low water pressure:
    • Low water pressure can be a symptom of issues with the boiler. A qualified technician should investigate the problem. .
  • Leaks or drips near your boiler:
    • If you notice water pooling around your boiler, it's important to get it checked by a professional immediately.
  • Pilot light goes out frequently: If you have an older boiler and the pilot light goes out frequently, it may need to be repaired or replaced. .
  • Yellow flame instead of blue: A yellow flame on a gas boiler can mean there is incomplete combustion or a dangerous carbon monoxide leak. If you see a yellow flame, turn off the boiler and contact a qualified technician immediately..
If you are experiencing any of these issues, contact a qualified heating engineer for a boiler inspection and get advice on whether a replacement is necessary.

What is the difference between a regular boiler and a system boiler?

Regular boilers and system boilers have some similarities, but differ in their components:* **Regular boiler (conventional boiler):** Needs several external components, including a cold water tank (usually located in the loft), a hot water cylinder (often in an airing cupboard), and an expansion tank. It's best suited for larger properties.* **System boiler:** A more compact system, as some components are integrated within the unit itself. This means it takes up less space and is easier to install than a regular boiler.. If you're unsure which type of boiler is best for you, consult with a Gas Safe registered heating engineer.

What is a power flush, and do I need one for my new boiler?

A power flush is a deep cleaning of your central heating system, using specialized equipment to remove sludge, rust, and other debris that can build up over time. This buildup can restrict water flow, reduce heating efficiency, and cause damage to your boiler and other components.While not always strictly necessary with a new boiler, a power flush is often recommended, especially if you're replacing an older system. It ensures that your new boiler is installed in a clean and efficient system, maximizing its performance and lifespan. A clean system also helps reduce noise and improve heat distribution.Signs that you might need a power flush include cold spots on radiators, slow heating, frequent boiler breakdowns, or noises coming from your heating system. Discuss with your boiler installer whether a power flush is advisable for your specific situation.

How do I turn off my boiler?

To turn off your boiler, locate the main switch or control panel. There will be an on/off switch or a mode selection dial. Switch the boiler to the 'off' position or turn the dial to the '0' or 'reset' setting. . For extra safety, you may also want to turn off the gas supply to the boiler, if applicable.

What are the signs that I need a new boiler?

Several symptoms can indicate it's time to replace your boiler :
  • Your boiler is more than 15 years old:
    • Older boilers are much less efficient than modern condensing boilers and are more likely to break down, so upgrading to a new, energy-efficient boiler could save you significant amounts on your energy bills over time.
  • Your boiler keeps breaking down:
    • Frequent service calls might mean it's time for a new boiler.
  • Your energy bills are increasing:
    • An inefficient boiler uses more energy to heat your home, increasing your utility costs.
  • Your boiler is making strange noises:
    • Unusual banging, whistling, or gurgling sounds could indicate a problem with your boiler and require professional service.
  • Your radiators are not heating up properly:
    • Radiators not getting hot evenly or consistently could indicate a problem with your boiler's circulation.
  • Low water pressure:
    • Low water pressure might mean your boiler is not functioning optimally. A qualified technician should investigate the problem. .
  • Leaks or drips near your boiler:
    • If you notice water pooling around your boiler, it's important to get it checked by a professional immediately.
  • Pilot light goes out frequently: If you have an older boiler and the pilot light goes out frequently, it may need to be repaired or replaced. .
  • Yellow flame instead of blue: A yellow flame on a gas boiler can mean there is incomplete combustion or a dangerous carbon monoxide leak. Seek immediate assistance from a qualified professional.
Prompt action might prevent complete boiler failure, which can be very disruptive during colder seasons.

What is the difference between a regular boiler and a system boiler?

Regular boilers and system boilers have some similarities, but differ in their components:* **Regular boiler (conventional boiler):** Needs several external components, including a cold water tank (usually located in the loft), a hot water cylinder (often in an airing cupboard), and an expansion tank. It's best suited for larger properties.* **System boiler:** Stores hot water in a cylinder but has some key components built in, like the expansion vessel and pump. . It doesn't require a separate feed and expansion tank, saving some space. If you're unsure which type of boiler is best for you, consult with a Gas Safe registered heating engineer.

What is a power flush, and do I need one for my new boiler?

A power flush is a deep cleaning of your central heating system, using specialized equipment to remove sludge, rust, and other debris that can build up over time. This buildup can restrict water flow, reduce heating efficiency, and cause damage to your boiler and other components.While not always strictly necessary with a new boiler, a power flush is often recommended, especially if you're replacing an older system. It ensures that your new boiler is installed in a clean and efficient system, maximizing its performance and lifespan. A clean system also helps reduce noise and improve heat distribution.Signs that you might need a power flush include cold spots on radiators, slow heating, frequent boiler breakdowns, or noises coming from your heating system. Discuss with your boiler installer whether a power flush is advisable for your specific situation.

How do I turn off my boiler?

To turn off your boiler, consult your boiler's manual for specific instructions, but most boilers are turned off at the main control panel. For extra safety, you may also want to turn off the gas supply to the boiler, if applicable.