If the pressure gauge on your boiler is reading below 1 bar, you'll need to repressurize the system. Repressurizing is a straightforward process:1. Turn off your boiler and allow it to cool.2. Locate the filling loop. This is usually a flexible braided hose connected to your mains water supply and boiler, under the unit. Sometimes, the loop is built in; other times, it is external. 3. Open both valves on the filling loop slowly, usually counterclockwise. . You should hear water flowing into the system. .4. Keep an eye on the pressure gauge. When the pressure reaches the appropriate pressure, close both valves on the filling loop firmly.5. Turn your boiler back on. Confirm that pressure is at an appropriate level. If problems persist, contact a qualified HVAC technician. If you're not sure how to repressurize your boiler, it's best to consult a professional. Ensure your safety and avoid costly repairs by having it done right.