Boiler Installation Shelton

Frequently Asked Questions About Boiler Installation

What are the different types of boilers?

There are several types of boilers available , each with its pros and cons::

• Combi Boilers (Combination Boilers): Most common and provide both heating and hot water instantly , saving space by eliminating the need for separate hot water tanks or cylinders. If you use a lot of hot water, consider other options.
• Regular Boilers (Conventional, Heat-Only Boilers): More complex systems that involve both a storage tank and a hot water cylinder. They deliver a consistent supply of hot water but are usually less energy-efficient than newer boiler types.
• System Boilers: These boilers heat your central heating directly and also store hot water in a cylinder. They are more compact than regular boilers but more expensive than combi boilers. . System boilers are suitable for properties with more than one bathroom or high hot water usage.
• Condensing Boilers: High-efficiency boilers that improve energy efficiency by reusing heat from the flue gases. These are more expensive initially but reduce energy consumption and operating costs.

Consult with a heating engineer to determine the best boiler type for your property.

How do I bleed my radiators?

If your radiators have cold spots or are not heating up efficiently, they may need to be bled to remove trapped air. This straightforward process can help improve your heating:1. Turn off your central heating system and allow the radiators to cool down completely. 2. Locate the bleed valve on the radiator. It's usually a small, square-shaped valve on one of the top corners. .3. Place a radiator key if you don't have a radiator key on the bleed valve and slowly turn it counterclockwise. . You should hear a hissing sound as air escapes..4. Hold a cloth or container under the valve to catch any water that may leak out. .5. Continue turning the key until the hissing stops and water starts to come out steadily. .6. Tighten the valve clockwise .7. Repeat this process for all the radiators in your home.8. Once you have bled all the radiators, turn your central heating system on and monitor boiler pressure. Confirm that your system pressure is in the normal range for optimal boiler performance. If not, consult with a professional HVAC technician. Adjust the pressure if needed. If you are unsure how to do this, consult the manufacturer’s instructions or call a Gas Safe registered heating engineer. By bleeding radiators, you can improve their effectiveness and the overall performance of your central heating system.

How do I reset my boiler?

If your boiler is not responding, sometimes a simple reset solves the issue. Most boilers have a reset button or switch. Press and hold this button for about 30 seconds . If problems persist, contact a qualified professional for help.

What is a combi boiler?

A combi boiler (combination boiler) provides both central heating and domestic hot water on demand, directly from the mains water supply. They are much smaller than traditional boilers, saving valuable space. Combi boilers are very popular in flats and houses with less hot water requirements since they deliver hot water instantly to taps and showers. If you use a lot of hot water at once, the temperature and pressure may decrease; however, the hot water is readily and immediately replaced by more heated water.