Boiler Installation West Elmira

Frequently Asked Questions About Boiler Installation

How do I bleed my radiators?

If your radiators have cold spots or are not heating up efficiently, they may need to be bled to improve heating performance and circulation. Bleeding radiators can also reduce noise levels and improve your system's energy efficiency. This straightforward process can help improve your heating:1. Turn off your central heating system and allow the radiators to cool down completely. 2. Locate the bleed valve on the radiator. A special key is often needed.3. Place a radiator key if you don't have a radiator key on the bleed valve and slowly turn it counterclockwise. . Air trapped in the system will escape during this process.4. Hold a cloth or container under the valve to catch any water that may drip.5. Continue turning the key until water begins to flow steadily.6. Tighten the valve clockwise .7. Repeat this process for all the radiators in your home.8. Once you have bled all the radiators, turn your central heating system on and monitor boiler pressure. The pressure should be between 1 and 1.5 bar when the system is cold. Adjust the pressure if needed. If you are unsure how to do this, consult the manufacturer’s instructions or call a Gas Safe registered heating engineer. By bleeding radiators, you can improve their effectiveness and the overall performance of your central heating system.

How do I reset my boiler?

If your boiler stops working, try resetting it . Most boilers have a reset button or switch. Press and hold this button for about 30 seconds . If problems persist, contact a qualified professional for help.

What is a combi boiler?

A combi boiler (combination boiler) provides both central heating and domestic hot water on demand, directly from the mains water supply. Unlike conventional boiler systems, a combi boiler doesn't require a separate hot water cylinder or a cold water storage tank in the loft, which makes them compact and ideal for properties where space is limited. Get instant hot water with a combi boiler. If you use a lot of hot water at once, the temperature and pressure may decrease; however, the hot water is readily and immediately replaced by more heated water.

What are the different types of boilers?

There are several types of boilers to choose from, each with its pros and cons::

• Combi Boilers (Combination Boilers): Most common and provide both heating and hot water instantly , They are compact and ideal for smaller spaces. If you use a lot of hot water, consider other options.
• Regular Boilers (Conventional, Heat-Only Boilers): These boilers require both a cold water storage tank (usually in the loft) and a hot water cylinder (usually in an airing cupboard), taking up more space. They deliver a consistent supply of hot water but are usually less energy-efficient than newer boiler types.
• System Boilers: These boilers heat your central heating directly and also store hot water in a cylinder. They are generally a good middle ground between other options. System boilers are suitable for properties with more than one bathroom or high hot water usage.
• Condensing Boilers: Highly efficient units recycle heat from exhaust gases to pre-heat water, minimizing waste. They're better for the environment and can save you money in the long run.

Discuss your needs and circumstances with an HVAC professional.