Furnace Repair Pasadena

Frequently Asked Questions about Furnace Repair

How often should I change my furnace filter?

It's recommended to change your furnace filter every 1-3 months, or more often if you have pets, allergies, or live in a dusty area. A clean furnace filter improves indoor air quality and keeps your system running efficiently. Check your filter monthly and change it as needed.

What is the difference between a single-stage and two-stage furnace?

Single-stage and two-stage furnaces differ in their heating output capabilities:
Single-stage furnaces have only one setting, they either operate at 100% or are off. This may cause uneven heating and fluctuating bills because the furnace is either running at its maximum setting or completely off..
Two-stage furnaces offer two levels of heat output: a lower setting for mild weather and a higher setting for colder temperatures. This allows the furnace to modulate its output based on the actual heating demand, resulting in more consistent temperatures, quieter operation, and improved energy efficiency.Two-stage furnaces provide enhanced home comfort and energy savings compared to single-stage models.

How do I reset my furnace?

If your furnace isn't working correctly, a simple reset can sometimes resolve the issue. Here's how to reset most furnaces:

1. Turn off the furnace: Set the thermostat to the 'off' position.
2. Turn off the power: Locate the circuit breaker for your furnace and switch it off.
3. Wait: Wait at least 30 seconds, though longer is sometimes recommended for the system to reset.
4. Turn the power back on: Flip the circuit breaker back to the 'on' position.
5. Turn on the furnace: Turn the thermostat back on and set it to your desired temperature.

If the problem continues or if you encounter error codes, it's best to call a qualified HVAC technician for diagnosis and repair..

Why is my furnace making strange noises?

Strange noises from your furnace can indicate a variety of problems, from minor issues to major malfunctions. :

• Banging or popping: Could be due to a buildup of sediment in the heat exchanger.
• Squealing or screeching: Often a sign of a problem with the blower motor or other moving parts.
• Rumbling or vibrating: Check for loose parts or components.
• Clicking: May be caused by a faulty igniter, control board, or other electrical components. If the clicking sound is persistent, it is best to contact an HVAC technician.
• Whining: Similar to squealing or screeching, this indicates an issue with a motor.

Addressing the issue early can often save you from a larger expense later.