A French drain is a common drainage solution. It's often used in conjunction with a sump pump system to reduce the amount of water that enters the sump pit.. French drains can be installed around the perimeter of your home or in specific areas where water tends to collect.

What is a sump pump alarm?

A sump pump alarm is a safety device that notifies you if the water in your sump pit gets too high, often indicating that the pump has failed or is malfunctioning. Consider these options:

Water-activated alarms: They activate when water touches the sensor.
Pressure-activated alarms: A change in pressure triggers the alarm.
High-water alarms: A float-activated switch triggers the alarm at a preset water level.

They're highly recommended, especially if your basement is finished.

Do I need a sump pump if I have a French drain?

French drains and sump pumps often work together to prevent flooding. A sump pump is still necessary to remove water that collects in the sump pit, especially during heavy rainfall or when the water table is high. However, a pump offers active water removal. If you live in an area with a high water table or your basement is prone to flooding, it's best to have both a French drain and a sump pump to provide the best protection..

Why is my sump pump running but not pumping water?

If your sump pump is running, but not pumping water, there are a few possible reasons::

Clogged Discharge Line: The most common reason is a clogged discharge line. . Check the discharge line and remove any obstructions.
Frozen Discharge Line: In cold weather, the discharge line can freeze, preventing the pump from removing water. . Insulate the pipe to prevent future freezing.
Clogged Impeller: The impeller, which is the spinning part of the pump that moves the water, can become clogged with debris.. Inspect the impeller for any obstructions.
Faulty Check Valve: A check valve allows water to flow in one direction only, preventing backflow. Replace the check valve if necessary.
Switch Problems: Inspect the pump's switches to make sure they are working. Replace the switch if it's malfunctioning.
Motor Issues: The pump motor might need replacement. If you hear a humming sound but no water is moving, this could indicate a motor problem.

If you suspect a problem with your sump pump, consult with a professional. Don't attempt to repair it yourself unless you have the necessary electrical experience and knowledge of safety precautions for working with water and electricity.

What is a French drain?

What is a sump pump alarm?

A sump pump alarm is a safety device that notifies you if the water level in your sump basin gets too high, which could indicate a problem with your sump pump. . Consider these options:

Water-activated alarms: These alarms have a sensor that is placed in the sump pit and will sound an alarm when it comes in contact with water. .
Pressure-activated alarms: A change in pressure triggers the alarm.
High-water alarms: A float-activated switch triggers the alarm at a preset water level.

They're highly recommended, especially if your basement is finished.

Do I need a sump pump if I have a French drain?

French drains and sump pumps often work together to prevent flooding. A sump pump is still necessary to remove water that collects in the sump pit, especially during heavy rainfall or when the water table is high. A French drain can help reduce the workload, but it's not a foolproof solution.. Install both systems for optimal basement waterproofing.

Why is my sump pump running but not pumping water?

If your sump pump is running, but not pumping water, there are a few possible reasons::

Clogged Discharge Line: Debris or ice can block the pipe and prevent water from being pumped out. Inspect the line for clogs and ensure proper drainage.
Frozen Discharge Line: Frozen pipes are common in the winter. Thaw the pipe with a hairdryer or heat tape..
Clogged Impeller: The impeller is responsible for drawing water into the pump. Inspect the impeller for any obstructions.
Faulty Check Valve: A malfunctioning check valve can prevent the pump from creating enough suction to pump water.. Replace the check valve if necessary.
Switch Problems: Inspect the pump's switches to make sure they are working. Replace the switch if it's malfunctioning.
Motor Issues: The pump motor may be burnt out or malfunctioning, preventing it from pumping water. . A faulty motor might not be able to drive the pump.