Furnace Repair Las Cruces

Find top Furnace Repair in Las Cruces

Receive 3 FREE Furnace Service quotes for your project today! Compare profiles, reviews, accreditations, portfolio, etc... and choose the best service.

Service Needed
City or Town
Find Pros
  • B. Carlson Heating, Air Conditioning & Plumbing
    4.8
    8625 Paseo Alameda NE, Albuquerque, 87113, US

    B. Carlson Heating, Air Conditioning & Plumbing is your one-stop solution for repair, maintenance and replacement of heating, cooling and plumbing systems in the Albuquerque area. Our team of highly skilled professionals have the tools and expertise necessary to help with all your home's service needs using the industry's most advanced tools and techniques. Contact B. Carlson today at (505) 349-4409 for top-notch HVAC and plumbing services in the Albuquerque, NM area.

    Get Quote
  • Big Bear Mechanical
    4.6
    10000 Central Ave NW, Albuquerque, NM, 87110, US

    Save Money When You Schedule Residential or Commercial HVAC Services WE’RE PROUD TO OFFER A FIRST RESPONDERS AND MILITARY DISCOUNT CONTACT US TODAY Heating Cooling Plumbing New HVAC Who Will You Call in Case of an HVAC Emergency? There’s no good time to have an HVAC malfunction. If faulty equipment is making your property uncomfortably hot or cold, reach out to the pros at Big Bear Mechanical. We offer 24/7 emergency commercial and residential HVAC services in Albuquerque, NM and surrounding areas. Rely on us to locate the source of the problem and find a solution quickly.Make us your go-to commercial and residential HVAC services provider in Albuquerque, NM and surrounding areas CONTACT US

    Get Quote
  • Air Conditioning Systems, Inc.
    4.7
    Albuquerque, US

    Get Quote
  • Capitol Contractors
    3.5
    1305 Clark Rd, Santa Fe, 87507, US

    Plumbing, heating, and air conditioning systems make our lives easier and more comfortable every day. When something goes wrong with one of these systems, the effects are just to hard to ignore. Fortunately, you can count on Capitol Contractors to get your home back in order. After 55 years in business, our family-owned company can handle any plumbing, heating, or air conditioning job you throw our way. We do our work with the utmost care to ensure consistent, high-quality service every time. And because we are a family-run business, our rates are always fair and affordable. Always Available for Emergency Service Do you have a plumbing, heating, or cooling problem that can't wait until tomorrow? For issues that need urgent attention, such as burst pipes, water heater failures, gas leaks, complete furnace or AC break downs, and other similar problems, call our 24-hour emergency hotline. Capitol Contractors is on standby day and night to make sure you have a trusted expert that you can rely on when you need it most.Give us a call at (505) 989-7916 if you have an emergency, or book an appointment online for non-emergency services.

    Get Quote
  • Trane - Heating & Cooling Services
    5
    Albuquerque, US

    Trane is a leading provider of heating, ventilation, and air conditioning (HVAC) systems for residential and commercial buildings. With a rich history of innovation and a commitment to customer satisfaction, Trane offers a wide range of high-quality products and services to meet the diverse needs of its customers. From traditional furnaces and air conditioners to advanced heat pumps and smart thermostats, Trane has a solution for every home and business. The company's team of expert technicians is dedicated to providing exceptional service and support, ensuring that customers enjoy optimal comfort and energy efficiency.

    Get Quote
  • Western Mechanical
    4
    3301 Girard Blvd, NE, Albuquerque, 87107, US

    Western Mechanical is a lifecycle provider of Commercial, Residential and Specialty Construction services in the greater Albuquerque area and state of New Mexico. Mike and the Western Mechanical team are focused on the work of building and maintaining residential and commercial air & heating systems for you. Since 1995, Western Mechanical has been providing efficient service with high-quality workmanship. We offer an extensive variety of services for your heating and cooling needs, including: Refrigerated Air Conditioning, Evaporative Cooling, Forced Air Heating, Hot Water Heating (including Boilers and Water Heaters). We are a preferred customer service agreement provider, offering benefits such as discounts, maintenance contracts & service agreements, and 24-hour emergency service (with service contract). Our technicians undergo regular training to stay up-to-date on the latest technology and ensure you get the best possible service. We are licensed, bonded and insured; so, you can count on us to get the job done right—the first time. When you contact Western Mechanical, we will treat you with the respect you deserve and your heating or cooling system with the excellence it demands. Our honest and reliable certified technicians are here for all of your Albuquerque & Rio Rancho heating and cooling needs, 24 hours a day, 7 days a week. You can count on us to provide professional, friendly and dependable service from start to finish. When you want the quality you deserve from one of the most respected and successful Albuquerque HVAC contractors in the Albuquerque metropolitan area, look no further than Western Mechanical—where you can feel the difference!

    Get Quote
  • Albuquerque Winair
    4.5
    Albuquerque, US

    Get Quote

Over 1,997+ HVAC Businesses in our network

Our HVAC pros operate in Las Cruces & surroundings!

HVACCompaniesHub has curated and vetted the Best HVAC Contractors near Las Cruces. Find a top & reliable pro today.

Frequently Asked Questions about Furnace Repair

Having problems with your heating system? Get answers to common questions about furnace repair so you can make informed decisions.

What causes a furnace to stop working?

There are many potential causes of furnace failure, ranging from simple issues to more complex problems. Some of the most common causes include::
  • Lack of power: Check the circuit breaker to ensure the furnace is receiving power. A tripped breaker is a common and easily resolved problem.
  • Thermostat problems: A faulty thermostat may not be signaling the furnace to turn on. A malfunctioning thermostat requires replacement.
  • Clogged air filter: A clogged air filter can cause many problems. Try replacing the filter.
  • Ignition problems: The igniter or pilot light (in older furnaces) is responsible for lighting the burners. In newer furnaces, electronic ignition systems control this process and should be checked if there are problems.
  • Blower motor issues: The blower motor is crucial to distributing warm air throughout your home. If the blower motor is broken, the furnace may not produce enough heat.
  • Gas supply problems (for gas furnaces): Gas furnaces require both gas and electricity to function properly. Check that there are no gas leaks.
  • Other component failures: Other components, such as the inducer motor, capacitor, or pressure switch, might be responsible.
It is typically best to avoid trying to fix the furnace on your own unless you're a qualified HVAC professional.

What are the most common furnace problems?

Common furnace problems range from minor issues to major system failures, such as:
  • No Heat or Reduced Heat Output: This can be caused by a variety of issues.
  • Strange Noises: Listen for any sounds out of the ordinary.
  • Short Cycling: This is when the furnace turns on and off rapidly, reducing efficiency and potentially causing damage.
  • Pilot Light/Ignition Problems: Make sure your pilot light is on, or your ignition system is functioning correctly.
  • Blower Motor Issues: The blower motor circulates air through the furnace and ductwork. A malfunctioning blower motor can cause reduced airflow, uneven temperatures, and loud noises. requires attention.
  • Dirty Air Filter: A clogged air filter restricts air circulation. It may lead to more serious problems.
  • Cracked Heat Exchanger: This is a serious safety hazard, as it can lead to carbon monoxide leaks. A cracked heat exchanger needs to be repaired or replaced immediately.
If you are experiencing any of these issues, it is important to contact a qualified HVAC professional for diagnosis and repair.

How do I reset my furnace?

Before calling for repairs, consider resetting your furnace. Here's how to reset most furnaces:
  1. Turn off the furnace: Set the thermostat to the 'off' position.
  2. Turn off the power: Locate the circuit breaker for your furnace and switch it off.
  3. Wait: Wait a few minutes for the system to fully power down.
  4. Turn the power back on: Flip the circuit breaker back to the 'on' position.
  5. Turn on the furnace: Turn the thermostat back on and set it to your desired temperature.
If the problem persists after the reset, don't attempt to diagnose or repair the issue yourself.

What is a pilot light?

A pilot light is a small, continuous flame used to ignite the main burners. It's how older furnaces ignite the gas. Most modern furnaces use an electronic ignition system. While pilot lights are generally reliable, they can sometimes go out or malfunction, requiring relighting or repair. Electronic ignition systems are usually safer and more efficient.

What causes a furnace to stop working?

There are several reasons why your furnace might stop working, ranging from simple issues to more complex problems. Some of the most common causes include::
  • Lack of power: Check the circuit breaker to ensure the furnace is receiving power. Make sure the power switch near the furnace is also on.
  • Thermostat problems: Check that the thermostat is set correctly to 'heat' and at a temperature higher than the current room temperature. Replace batteries if the display is blank or not working. A malfunctioning thermostat requires replacement.
  • Clogged air filter: A dirty air filter can restrict airflow and prevent the furnace from working efficiently.. Try replacing the filter.
  • Ignition problems: Issues with the igniter or pilot light can prevent the furnace from starting. A faulty igniter or pilot light may need to be cleaned or replaced..
  • Blower motor issues: The blower motor circulates air through the furnace and ductwork. A faulty motor can prevent air from circulating properly..
  • Gas supply problems (for gas furnaces): Gas furnaces require both gas and electricity to function properly. Check that there are no gas leaks.
  • Other component failures: Other components, such as the inducer motor, capacitor, or pressure switch, might be responsible.
If you cannot identify or resolve the issue yourself, contact a qualified HVAC technician for diagnosis and repair .

What are the most common furnace problems?

Common furnace problems range from minor issues to major system failures, such as:
  • No Heat or Reduced Heat Output: This can be caused by a variety of issues.
  • Strange Noises: Unusual sounds like banging, squealing, or rumbling can indicate problems with the blower motor, igniter, or other components.
  • Short Cycling: This is when the furnace turns on and off too frequently, reducing efficiency and potentially causing damage.
  • Pilot Light/Ignition Problems: In older furnaces, a faulty pilot light can prevent the furnace from igniting. In newer furnaces, issues with the electronic ignition system can cause similar problems.
  • Blower Motor Issues: If the blower motor isn't functioning, your furnace may not distribute heat properly. A malfunctioning blower motor can cause reduced airflow, uneven temperatures, and loud noises. requires attention.
  • Dirty Air Filter: A clogged air filter reduces airflow and decreases furnace efficiency. . It may lead to more serious problems.
  • Cracked Heat Exchanger: This is a serious safety hazard, as it can lead to carbon monoxide leaks. This is considered an emergency.
If you are experiencing any of these issues, it is important to contact a qualified HVAC professional for diagnosis and repair.

How do I reset my furnace?

Before calling for repairs, consider resetting your furnace. Here's how to reset most furnaces:
  1. Turn off the furnace: Set the thermostat to the 'off' position.
  2. Turn off the power: Locate the circuit breaker for your furnace and switch it off.
  3. Wait: Wait a few minutes for the system to reset.
  4. Turn the power back on: Flip the circuit breaker back to the 'on' position.
  5. Turn on the furnace: Turn the thermostat back on and set it to your desired temperature.
If the problem persists or if you encounter error codes, it's best to call a qualified HVAC technician for diagnosis and repair..

What is a pilot light?

A pilot light is a tiny flame used in older furnaces. When the thermostat signals for heat, the pilot light ignites the main burners, heating the air. . While pilot lights are generally reliable, they're not as efficient as newer ignition systems They also consume a small amount of gas continuously, even when the furnace is not actively heating. .