Furnace Repair Roswell

Frequently Asked Questions about Furnace Repair

How often should I change my furnace filter?

It's recommended to change your furnace filter at least quarterly, or more often if you have pets, allergies, or live in a dusty area. Regularly replacing filters is simple and helps prevent many furnace problems. Check your filter monthly and change it as needed.

What is the difference between a single-stage and two-stage furnace?

Single-stage and two-stage furnaces differ in their heating output capabilities:
Single-stage furnaces operate at only one output level – full capacity. This can lead to uneven heating and fluctuating bills because the furnace is either running at its maximum setting or completely off..
Two-stage furnaces offer two levels of heat output: a lower setting for mild weather and a higher setting for colder temperatures. This allows the furnace to modulate its output based on the actual heating demand, resulting in more consistent temperatures, quieter operation, and improved energy efficiency.Two-stage furnaces provide enhanced home comfort and energy savings compared to single-stage models.

How do I reset my furnace?

Before calling for repairs, consider resetting your furnace. Here's how to reset most furnaces:

1. Turn off the furnace: Set the thermostat to the 'off' position.
2. Turn off the power: Locate the circuit breaker for your furnace and switch it off.
3. Wait: Wait a few minutes for the system to reset.
4. Turn the power back on: Flip the circuit breaker back to the 'on' position.
5. Turn on the furnace: Turn the thermostat back on and set it to your desired temperature.

If the problem continues or if you encounter error codes, don't attempt to diagnose or repair the issue yourself.

Why is my furnace making strange noises?

Unusual sounds from your furnace can indicate a variety of problems, it's important to pay attention to these sounds to identify potential issues early on:

• Banging or popping: Could be due to dirty burners, delayed ignition, or expanding ducts.
• Squealing or screeching: Often indicates an issue with the blower motor or the inducer motor.
• Rumbling or vibrating: Might suggest a loose or damaged component or a problem with the burner.
• Clicking: Could be from the igniter, but it can also come from other electrical problems If the clicking sound is persistent, it is best to contact an HVAC technician.
• Whining: Similar to squealing or screeching, this indicates an issue with a motor.

If your furnace is making strange noises, recommended to have the system inspected. Ignoring unusual sounds can lead to further damage or costly repairs down the road.